AMIKO A3 T2/C FULL HD DIGITAL SMART SET-TOP BOX & T2 TERRESTRIAL / CABLE RECEIVER
Features
High performance quad-core CPU
Developed by Spark 2 / Android 4.4 Kit Kat
Conax card reader integrated
Quick and easy installation
multimedia playback from an external hard drive, USB, network or via DLNA
Recording channels to an external hard drive, USB or network
Miracast support, and Airplay
transmission channels and remote management over LAN / Internet via the web interface
remote management and transmission channels to Android and iOS devices with Spark Player
Ethernet connection
Web browsing with support for Adobe Flash Player
Wireless-N Wi-Fi integrated
Support 3G USB modem
VPN support
Android compatible games
You can download various applications and games from the App Store Spark!
Google Play! Store available
A high-speed USB 3.0 and two USB 2.0 ports
MicroSD expansion
KODI support – Make your own Media Center
Full HD – 1080p output via HDMI
CVBS video and audio output via RCA (Jack type)
Support of DiSEqC 1.0, 1.1, 1.2 and USALS
Dolby Digital bit output via HDMI and S / PDIF
Simple software updates over the internet
Low power consumption in standby mode
Â
SPECIFICATIONS
system resources
Main processor: ARM Cortex A7 1.5GHz quad-core CPU
Flash memory: 2 MB SPI NOR Flash + 8GB Nand Flash
DDR SDRAM: DDR2 1GB
Tuner and demodulation
Tuner Type: DVB-T2 / DVB-C
Frequency range: 48 ~ 862 MHz
RF input level: -80dBm to -20dBm
Antenna power: DC 5V 75mA max, overload protection
Demodulation: COFDM 1K, 2K, 4K, 8K normal and wide, normal and expanded 16K, 32K normal and extended
Symbol Input: 1.0 ~ 7.0Ms / s
Constellations QPSK, 16QAM, 64QAM, 256QAM / Both twisted and unrecognized
Protection intervals: 04/01, 19/256, 01/08, 19/128, 16/01, 1/32, 1/128
Coding rate: 1/2, 3/5, 2/3, 3/4, 5/6
Decoding audio / video
Entrance fee: max. 120 Mbit / s
Aspect ratio: 4: 3, 16: 9
Decoding MPEG-2 MP @ ML, MPEG-4 Part 10 / H.264, H.265 (only 8 bits)
Video Resolution: 720 * 480p / i, 720 * 576p / i, 1280 * 720p, 1920 x 1080i / p, 2160p
Audio Decoding: MPEG-1 Layer I / II, MPEG2 Layer II, Dolby Digital
Audio Mode: Left / Right / Stereo / Mono
Sampling frequency: 32, 44.1 and 48 kHz
interfaces
HDMI Ver 1.4, Type A
AV: Type Jack (CVBS video and L / R Audio output)
S / PDIF output bit-stream of digital audio / Dolby Digital
Ethernet: RJ45 (10 / 100M)
WiFi: Embedded IEEE802.11 b / g / n (up to 150Mbps)
USB: 1 Type A USB 3.0 port, two USB 2.0 Type A port Micro
SD Card: Micro SD card reader
CA: Integrated Smart Card Reader Conax
remote control
Type: Infrared
power
Type: External
Input: 110-230V AC
Output voltage: 12V DC / 2A
physical specifications
Dimensions (width x width x height): 160 mm x 120 mm x 30 mm
Working temperature: 0-45
Storage: -10 – 70
Storage Humidity: 5% – 95% RH (non-condensing)
AMIKO A3 T2/C Firmware Ver_1.0.36
Hi3796MV100_fl_ ota-15-07-2016
Hello
I can’t download firmware to Amiko A3 T2/C. Could you send me it on e-mail?
Thank you